VibroMatrix®  Set
Kit  for human Whole-Body Vibration Measurement
The VMSet-13 comes in a handy case and provides you with everything you need for
the measurement of human whole-body vibration acc. to EN ISO2631:1997 and
directive 2002/44/ EC.
The system works with two small USB adapters, which transfer the data from the
seat accelerometer to your notebook. Extra mains adapters are not required. Cable
lengths of up to 100 meters are possible, you do not need to stand next to the test
person.
The software module InnoMeter HVM2631 exceeds the normal measurement with
small hand-held units: The program guides you through the measurement procedure
reliably, with clear indications and graphics for the correct sensor positioning.
Beginners measure quickly and error-free without long introduction/ training.
After the measurement, the data is available in your PC at once. Measurements can
be saved and read into again. At the push of a button, you print a record with your
company logo and layout acc. to your requirements.
The InnoMeter HVM2631 supports measurements acc. to
·         EN ISO2631-1:1997 (whole-body vibrations),
·         EN ISO2631-2: 2003 (vibrations in buildings) and
·         EN ISO2631-4: 2001 (vibrations in rail vehicles).
Acc. to the standard, the InnoMeter 2631 is designed for three channels. The usual
measurands and  weighting filters are integrated. With the choice of the measurement
mode, the parameters are adjusted automatically acc. to the standard. The following
calculations are integrated as well. The vibration total value (defined in the standard)
can be read off. The colored background indicates the good/ bad status.
The VMSet-13 is based on the modular VibroMatrix-system. That is why it can be
extended easily at any time, for instance by a software for frequency analysis. The
additional modules show the data on the screen of your notebook immediately as well
and can be operated simultaneously with the InnoMeter HVM2631.
	VMSet-13 Human Whole-Body Vibration Measurement
Signal Processing
Filter	Wb, Wc, Wd, Wj, Wk, and Wm filter acc.to the standard
Measurand	Vibration acceleration
Unit	m/s2
Parameters	Interval rms value
	Crest factor
	Maximum rms (MTVV)
Measurement duration	Adjustable 1 s . . 1 day
Graphical Presentation
Numeric Display	5 digits: 0.0001 .. 99999
Refresh	1.. 4 times per second*
Status Indicators	Sensor, measuring channel, measurand, parameter, gain, underload, overload
Required Screen Resolution	At least 800x600 pixel
Standard-relevant Data
Measurement Modes	- Whole-body vibration acc.to ISO2631-1 (except for kinetosis  assessment   and rolling motion) - Vibration in buildings acc.to ISO2631-2 - Rail vehicles acc.to ISO2631-4
Measurement	- User guide - Choice  of the measurement mode - Help  for the sensor positioning - Indication of elapsed and remaining measurement duration - Indication of the interval rms value for all axes - Indication of the crest factor for all axes - Indication of the MRVV for all axes - Indication of the vibration total value
Data Storage	- Saving up to 10,000 measurements - Indication of measurement mode, selected parameters as well as    verbally expressed assessment (good, acceptable, bad) - indication of detailed data for the marked measurement - For each measurement, remarks can be noted - Saving the measured values as a text file or in CSV format - Printing a configurable report about the measurement - CSV values can be read into the InnoMeter HVM2631 again
Hardware
Vibration Sensor	Type: Triaxial piezoelectric seat accelerometer KB103SV-100 Sensitivity: 100 mV/g Linear frequency range: 0.3 .. 400 Hz, resonant frequency > 10 KHz Operating temperature: -10 .. 80ðC Included accessories in the kit Cable adapter 3x BNC Weight: 310 gr./11 oz
Digitization	By USB adapter InnoBeamer L2 Inputs: 2xanalog, 1xdigital Signal frequency: 0.3 ..2000 Hz Supply current: <400 mA with supply of all 3 sensors Operating temperature: -20 .. 50ðC Weight: 130 gr.
VMSet-13: Components
2x InnoBeamer L2 + USB cable
1x Triaxial seat accelerometer KB103SV-100 + cable adapter 034
3x InnoMeter HVM 2631 software
1x VibroMatrix manual and CD